Flipklok
 
Loading...
Searching...
No Matches
clock.c File Reference

Setup of system clocks. More...

#include "clock.h"

Go to the source code of this file.

Functions

void setupClocks ()
 Setup clocks of system, all to LFXTAL input, get called from main()
 

Detailed Description

Setup of system clocks.

Definition in file clock.c.

Function Documentation

◆ setupClocks()

void setupClocks ( )

Setup clocks of system, all to LFXTAL input, get called from main()

Definition at line 16 of file clock.c.

17{
18 BCSCTL1 |= XT2OFF; // Disable XT2
19 BCSCTL1 &= ~XTS; //LFXT1
20 BCSCTL1 |= DIVA_0; // ACLK Divider 0: /1
21
22// BCSCTL2 |= SELM_3; // LFXT1CLK,
23// BCSCTL2 |= DIVM_0; // MCLK Divider 0: /1, LFXT1CLK, SMCLK Divider 0: /1
24 BCSCTL2 |= SELS; // LFXT1CLK, SMCLK Divider 0: /1
25 BCSCTL2 |= DIVS_0; // SMCLK Divider 0: /1
26 BCSCTL3 |= LFXT1S_0; // Mode 0 for LFXT1
27 BCSCTL3 |= XCAP_2; // Approximately 10 pF
28
29 //Enable when running cpu on 1 MHz instead of LFXTAL
30 BCSCTL1 |= CALBC1_1MHZ; // Load calibrated DCO setting for 1 MHz
31 DCOCTL |= CALDCO_1MHZ; // Load fine-tuned DCO setting
32 BCSCTL2 |= SELM_0; // MCLK = DCO
33 BCSCTL2 |= DIVM_0; // No division
34
35
36 // 3. Wait for the crystal to stabilize
37 while (IFG1 & OFIFG) { // Check oscillator fault flag
38 IFG1 &= ~OFIFG; // Clear oscillator fault flag
39 __delay_cycles(1000); // Wait for the crystal to stabilize
40 }
41}

Referenced by main().